AnkerMake M5 3D Printing Filament and Accessory Set-

Tests were conducted by AnkerMake in Sep. 2022 using AnkerMake FDM 3D Printer at operating speed of 250 mm/s.

Tests were conducted by AnkerMake in Sep. 2022 using AnkerMake FDM 3D Printer at operating speed of 250 mm/s.

Driven by PowerBoost™

You’ll achieve high-speed precision thanks to PowerBoost™, which optimizes energy with its Y-axis transmission system. PowerBoost™ uses a powerful stepper motor, double-belt driveshaft, and stabilized-motion algorithm to push out loads of extra power for high-speed printing.

• Standard Speed: 250 mm/s
• Accelerated Speed: Up to 2,500 mm/s²

3.1X Extrusion

Higher Multi-Stage Gear Ratio

The foundation of high-speed printing starts with the enhanced multi-stage gear system with a 9.37 reduction ratio putting out 0.8 N·m of torque. The strong twisting puts pressure on the melting chamber to make extrusion faster.

1.5X Melting

Larger Heating Block

The 60W heating rod quickly raises the nozzle temperature to 392°F (200°C) with 1.5X the efficiency of other printers. The heat makes sure the filament smoothly discharges while printing fast at 250 mm/s.

1.3X Cooling

More Air Input Volume

The double-cooling system uses a pair of fans that push out 1.3X the air output volume of other printers at max-speed. The cooling avoids stringing and helps quickly cool down your model.

The Integrated Intelligent Camera

• 1080p Full HD Resolution
• Real-Time Monitoring (Up to 720p)
• Timelapse Videos (1080p)
• Frame Rate: 30 fps

AI Camera Recognition System

The AnkerMake slicer analyzes the 3D data of the model before printing begins, then the AI Recognition System uses the powerful XBurst CPU to continually check and compare throughout the entire process.

Error Detected, Instant Alert

Protect Yourself From

• Spaghetti messes
• Staggered layers
• 1st layer adhesion failure
• Nozzle blocking

Monitor Your Prints 24/7

Check in when you want with real-time viewing via the AnkerMake app.

Even if it’s 3 AM, you can check on the progress of your print with adaptive light-sensing algorithms. Plus, timelapses look cooler after the sun goes down.

Share Your Timelapses

Feel good about your creations and show them off with timelapses that are easy to share on social media.

AnkerMake Slicer

AnkerMake App

Alexa and the Google Assistant

7×7 Auto-Leveling

Give your prints accuracy with 7×7 auto-leveling. Advanced algorithms calculate a virtual height map to get the print started right. The only time you need to do any tweaks by hand is when you upgrade something major like the nozzle or PEI soft magnetic steel plate.

Integrated Design Keeps Your Workspace Tidy

Avoid tangled cables and multiple stray devices with 1 neat, cohesive design. M5 consists of the base and the gantry frame, plus the Z-axis design hides any dangling wires from your view.

Bendable and Scratchproof Plates

No matter how big or small, removing a print is now easy with just a slight bend of the scratch-resistant PEI soft magnetic steel plate when it cools down. And with the heated bed’s magnetic design, you can easily remove and put the print sheet back.

Get Printing Status Notifications

You’ve got your choice of how to find out when something changes with your 3D print. See an LED light 33 ft (10 m) away, hear a beep, or get an app alert.

Print Large Models with High-Speed Efficiency

Supersize your prints to a whopping 235×235×250 mm³ and watch M5 handle the job fast at 5X speed.

4.3″ Touch Screen Simplifies Printing

Make the most common tasks easy with a smart, colorful LCD touchscreen. You can also switch to Night Mode to help your eyes when you’re working late.

Save Material with Instant Alerts

Never waste a moment or an ounce of filament again with low filament and error alerts. M5 scans before and during the print to ensure your print comes out exactly to your specifications.